2013 Victory Vision recalls and problems

The 2013 Victory Vision has 1 safety recall and 9 owner complaints filed with NHTSA. Recall repairs are free at any Victory dealer.

Recalls

Complaints

Crashes / fires

0 / 0

Injuries / deaths

0 / 0

Recalls may cover only some 2013 Victory Vision vehicles. Check your VIN at NHTSA ↗ to see open recalls for your exact car.

2013 Victory Vision recalls

Recall 12V-457: Equipment

Reported Sep 18, 2012 · 6,618 vehicles affected · POLARIS INDUSTRIES, INC.

Problem: Polaris is recalling certain model year 2012-2013 Victory motorcycles manufactured from January 3, 2012, through August 15, 2012. A torqueing procedure may have been missed on some throttle cable retention nuts. On certain motorcycles, the throttle cable retention nuts for either the pull or push throttle cable may have not been torqued correctly.

Risk: If the torqueing is missed and the retention nuts are loose, the retention nuts closest to the throttle body can become dislodged and interfere with the throttle function, increasing the risk of a crash.

Fix: Victory will notify owners and dealers will correctly torque the fasteners free of charge. The safety recall began on October 4, 2012. Owners may contact Victory consumer service department by calling 1-888-704-5290.

2013 Victory Vision problems reported by owners

Problem area	Reports
Structure	6
Steering	3
Engine	2
Wheels	1
Service Brakes	1

Most reported parts

Structure › Body — 4
Structure › Frame and Members › Underbody Shields — 1

Typical mileage at the time of the problem: 10,200 miles (median of owner reports).

Problems that are not covered by a recall are paid repairs; labor rates follow local mechanic pay — see what auto mechanics earn in each state.

Recent 2013 Victory Vision complaints

Owner reports filed with NHTSA, as written (personal details removed). Complaints are not verified by NHTSA.

Service Brakes · at 5,000 miles · reported Jul 12, 2019

The rear brake master cylinder has needed to be replaced twice in the 5 years that I have owned this motorcycle. Each time it failed it caused a loss in the ability to stop the bike while riding. I have been told by the dealership that I purchased the bike from that this is a common problem with many victory brand motorcycles. I have been told by the service manager at my dealership that the part can't be repaired but must be replaced, but the replacement parts, while they work as they should, are no better than the original parts and there is no guarantee that the same problem will not occur…

Structure · at 12,893 miles · reported Jun 9, 2015

The victory vision has a two piece plastic front fender which is held together with plastic fasteners and mounted directly to the metal forks with metal screws. Vibrations fractured the rear portion of the plastic fender at the point where it contacts the metal forks, this caused the rear portion of the fender to fail, dislodge itself and become wedged between the forks and the main body of the motorcycle affecting steering. Fortunately the speed was low and there was no accident, however, if this incident had occurred at highway speed or during cornering the result could have been fatal.…

Engine · at 2,000 miles · reported Dec 12, 2014

While slowing the motorcycle normally in preparation for stopping at a stop light in heavy traffic and rev-matching the engine normally, the engine stalled requiring evasive action to avoid collision with other vehicles and bring the motorcycle to a safe stop. The engine would not restart immediately and required 3 attempts to restart. This has happened on no less than four occasions. Manufacturer says the motorcycle engine is designed to stall in this manner. The timing and electronic fuel injection (Efi) are purposely designed to malfunction and read rev-matching on downshift as over…

Structure · at 23,200 miles · reported Oct 28, 2014

On routine inspection found a 1 to 2 inch crack in the plastic portion of the front fender. I have been watching for this problem after reading different victory internet sites. This problem has the potential to lock up the front wheel.

Structure · at 10,200 miles · reported Oct 14, 2014

2013 victory vision. The front rear section of the fender (Plastic) cracks where it attaches to the front forks. This is a widely known issue that has happened to 100;s if not 1,000s of victory visions. Polaris refuses to repair or replace, and suggests that it is normal wear and tear. This is a huge safely issue that must be investigated.

Other Victory Vision years

201420132012 2011 2010 2009 2008

Compare all Victory Vision years · All Victory models

Frequently asked questions

Does the 2013 Victory Vision have any recalls?

Yes — NHTSA lists 1 recall for the 2013 Victory Vision: 12V-457 (equipment). Not every vehicle is affected, so check your VIN at nhtsa.gov/recalls.

What is the most common problem with the 2013 Victory Vision?

Owners report structure problems most often (6 reports), followed by steering (3). The typical mileage when problems were reported is about 10,200 miles.

Are Victory recall repairs free?

Yes. Safety recall repairs are free at authorized Victory dealers, whether you are the first owner or bought the car used.