2008 Victory Vision recalls and problems

The 2008 Victory Vision has 3 safety recalls and 30 owner complaints filed with NHTSA. Recall repairs are free at any Victory dealer.

Recalls
3
Complaints
30
Crashes / fires
0 / 0
Injuries / deaths
0 / 0

Recalls may cover only some 2008 Victory Vision vehicles. Check your VIN at NHTSA ↗ to see open recalls for your exact car.

2008 Victory Vision recalls

Recall 08V-446: Electrical System

Reported Sep 3, 2008 · 2,444 vehicles affected · POLARIS INDUSTRIES, INC.

Problem: Polaris is recalling 2,444 my 2008 victory vision motorcycles. The terminal nuts that secure the main power supply wires could be loose at the circuit breaker, which can cause an unexpected loss of electrical power to the motorcycle. Also the current fuel ignition map pre-programmed into the electronic control module (Ecm) can cause engine stalling.

Risk: Either condition could cause the engine to stall, increasing the risk of a loss of control and a crash.

Fix: Dealers will inspect and tighten the circuit breaker terminal nuts and re-program the ECM free of charge. The recall began on september 23, 2008. Owners may contact polaris/victory at 1-888-704-5290.

Recall 08V-131: Electrical System

Reported Mar 20, 2008 · 1,585 vehicles affected · POLARIS INDUSTRIES, INC.

Problem: Polaris is recalling 1,585 my 2008 victory vision motorcycles. The electrical contact plate on the ignition switch base may not be properly secured to the ignition switch body, which can cause an unexpected loss of electrical power to the vehicle.

Risk: A loss of electrical power could cause the vehicle to stall, increasing the risk of a loss of control and a vehicle crash.

Fix: Dealers will fully secure the ignition switch base to the switch body. The recall began on april 2, 2008. Owners may contact polaris/victory at 1-888-704-5290.

Recall 07V-510: Electrical System

Reported Nov 1, 2007 · 326 vehicles affected · POLARIS INDUSTRIES, INC.

Problem: On certain motorcycles, the voltage regulator/rectifier assembly may have an overcharging condition. An overcharging situation in conjunction with the loose battery connection could cause a stalling condition.

Risk: An unexpected loss of engine power could cause a loss of control of the motorcycle increasing the risk of a crash.

Fix: Dealers will replace the voltage regulator/rectifier and inspect both battery cables for tightness. The recall began on november 5, 2007. Owners may contact polaris/victory at 1-888-704-5290.

2008 Victory Vision problems reported by owners

Problem areaReports
Service Brakes12
Structure7
Fuel/Propulsion System4
Service Brakes, Hydraulic3
Steering3
Suspension2
Engine and Engine Cooling1
Visibility1
Power Train1
Fuel System, Gasoline1
Seats1

Most reported parts

  • Structure › Body — 6
  • Power Train › Driveline — 1
  • Service Brakes, Hydraulic › Foundation Components › Hoses, Lines/Piping, and Fittings — 1
  • Structure › Motorcycle › Kickstand/Center Stand — 1

Typical mileage at the time of the problem: 30,000 miles (median of owner reports).

Problems that are not covered by a recall are paid repairs; labor rates follow local mechanic pay — see what auto mechanics earn in each state.

Recent 2008 Victory Vision complaints

Owner reports filed with NHTSA, as written (personal details removed). Complaints are not verified by NHTSA.

Service Brakes · at 3,500 miles · reported Jul 16, 2019
The rear brakes have failed a number of times. I have had them bleed and master cylinder replaced at the dealer but the problem continues to occur. Now that victory is no longer around service is becoming impossible. This is an extreme danger and the problem reoccurs. Air is getting into the lines somewhere. Bike is now parked as it is too dangerous to ride.
Service Brakes · at 30,000 miles · reported Sep 26, 2018
The rear brakes on my victory vision have gone out several times. I have tried everything that I can think of to fix the problem. Victory/polaris needs to recall this item and fix it. Driver safety is of great importance.
Service Brakes · reported May 19, 2017
When bike sits for a few weeks the rear break goes soft. Have to have mechanic bleed the breaks 1 or 2 times a year. Somehow air is getting in the line eather from break line or master cylinder. Problem is recurring.
Fuel/Propulsion System · reported Aug 31, 2016
Started smelling fuel after filling up, steadly getting worse over the months, dealer suggested replacing fuel cap which I did ( I noticed was updated with a better seal). After replacing it helped a bit. After checking closer noticed the filler neck on the tank is very thin aluminum and the surface is deformed not allowing the cap to seat properly.
Service Brakes · at 40,000 miles · reported Jul 12, 2016
Have had several issues with rear brake failure. Rear brake pedal goes all the way down, and does not engage the brakes. No leak signs of any fluid. This seems to be a serious problem with victory motorcycles after doing some research on line. Www.vision-riders.com. I have had my bike in the shop several times with this issue. The brakes were bled every time the rear brakes failed. I was traveling on a city street, a black in color chevrolet truck had pulled out in front of me. I immediately applied by front and rear breaks. When I applied my rear brakes, the pedal went down to the floor. I…

Other Victory Vision years

Compare all Victory Vision years · All Victory models

Frequently asked questions

Does the 2008 Victory Vision have any recalls?

Yes — NHTSA lists 3 recalls for the 2008 Victory Vision: 08V-446 (electrical system), 08V-131 (electrical system), 07V-510 (electrical system). Not every vehicle is affected, so check your VIN at nhtsa.gov/recalls.

What is the most common problem with the 2008 Victory Vision?

Owners report service brakes problems most often (12 reports), followed by structure (7). The typical mileage when problems were reported is about 30,000 miles.

Are Victory recall repairs free?

Yes. Safety recall repairs are free at authorized Victory dealers, whether you are the first owner or bought the car used.