2014 Kenworth T270 recalls and problems
The 2014 Kenworth T270 has 6 safety recalls and 1 owner complaint filed with NHTSA. Recall repairs are free at any Kenworth dealer.
Recalls may cover only some 2014 Kenworth T270 vehicles. Check your VIN at NHTSA ↗ to see open recalls for your exact car.
2014 Kenworth T270 recalls
Recall 20V-199: Service Brakes, Air, Electronic Stability Control (ESC)
Problem: PACCAR Incorporated (PACCAR) is recalling certain 2008-2019 Peterbilt 330, 335, 337, 340, 348, 365, 367, 384, 386, 387, 388, 389, 567, 579 and 587 vehicles and 2008-2020 Kenworth T170, T270, T370, T660, T680, T800, T880, and W900 vehicles equipped with NAMUX Software. In the event that the Anti-lock Brake System (ABS) loses battery and/or ignition power to the controller, the dash warning light for the ABS may not illuminate to warn the driver of the loss of ABS. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems," and 136, "Electronic Stability Control System on Heavy Vehicles."
Risk: If the driver unknowingly operates the vehicle without the ABS functioning, there would be an increased risk of a crash.
Fix: PACCAR will notify owners, and dealers will update the NAMUX software within the cab control module, free of charge. PACCAR issued owners an interim notification on June 4, 2020. The recall began May 26, 2020. Owners may contact Kenworth customer service at 1-425-828-5888 or Peterbilt customer service at 1-940-591-4220. PACCAR's number for this recall is 20pbc AND 20KWB.
Recall 15V-271: Visibility
Problem: PACCAR Incorporated (PACCAR) is recalling certain model year 2011-2016 Kenworth T270, T370, T440, T470, C500, C540, C550, T660, T800, W900, and 963 trucks manufactured November 1, 2010, to April 6, 2015. In the affected trucks, water may leak into the wiper motor.
Risk: As water leaks in, the wiper may cease to function on the 'intermittent' setting, reducing the driver's visibility and increasing the risk of a crash. Additionally, the water may cause corrosion which, over time, may result in an electrical short, increasing the risk of a fire.
Fix: PACCAR is still developing and testing a remedy. The recall is expected to begin in July 2015. An interim letter was sent to owners on July 2, 2015. The recall began on September 2, 1015. Owners may contact Kenworth customer service at 1-425-828-5000. PACCAR's number for this recall is 15KWF.
Recall 14V-013: Seat Belts
Problem: PACCAR Incorporated (PACCAR) is recalling certain model year 2014 Kenworth T660, T680, T700,T800, T880, W900, T440, T470, T370, T270, T170, C500, and C550 chassis manufactured between August 7, 2013, and October 31, 2013, and Peterbilt 320, 325, 330, 337, 348, 365, 367, 382, 384, 386, 388, 389, and 587 chassis manufactured between August 7, 2013, and November 3, 2013, and equipped with IMMI-brand L9 seat belt buckles. When the button is pressed to release the seat belt, the latch plate can become partially engaged with the buckle, making the seat belt difficult to unlatch. Thus, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard (FMVSS) No. 209, "Seat Belt Assemblies."
Risk: If the latch plate remains partially engaged after the button is pressed, egress from the vehicle could be hindered which would increase the risk of injury in the event of an emergency.
Fix: PACCAR will notify owners, and dealers will inspect and replace the seat belt buckles, as necessary, free of charge. The recall began on March 31, 2014. Owners may contact PACCAR at 1-425-468-7400. Kenworth's number for this campaign is 14KWC. Peterbilt's number for this campaign is 114-B.
Recall 13V-612: Exterior Lighting
Problem: PACCAR Incorporated (Paccar) is recalling certain model year 2014 Kenworth T170, T270, T370, T440, T470, T660, T680, T700, T800, T880, C500 and W900 trucks manufactured July 1, 2013 through September 17, 2013. In the affected vehicles, the plastic housing of the Stop/Tail/Turn (STT) lamp can shrink and allow the light bulb to fall out of the mounted retention ring. As such, the Stop/Tail/Turn light would not be illuminated, and the vehicles do not conform to Federal Motor Vehicle Safety Standard (FMVSS) No. 108 "Lamps, Reflective Devices, and Associated Equipment."
Risk: If the stop/tail/turn light is not illuminated, the driver's intentions would not be communicated, which increases the risk of a crash.
Fix: Kenworth will notify owners, and dealers will replace the defective STT lamps with new lamps. The recall began on February 4, 2014. Customers may contact Paccar at 1-425-468-7400. Kenworth's number for this recall is 13KWM.
Recall 13V-222: Electrical System
Problem: PACCAR is recalling certain model year 2014 Kenworth T170, T270, T370, T470, T660, T680, T800, T880, and W900 trucks manufactured May 6, 2013, through May 17, 2013; and model year 2014 Peterbilt 330, 337, 348, 365, 367, 382, 384, 386, 388, 389, 389K, 567, 579 and 587 trucks manufactured May 1, 2013 through May 17, 2013. An internal defect in the ignition switch causes the starter to engage when a key is partially inserted, before the key is turned.
Risk: Unintended engine startup could cause injury to a person working in the engine compartment. Vehicles with standard transmissions may experience unexpected movement, which may result in personal injury or a crash.
Fix: PACCAR will notify owners, and dealers will replace affected ignition switches, free of charge. The recall began on June 14, 2013. Owners may contact Kenworth at 1-425-828-5000 or Peterbilt at 1-940-591-4000. Kenworth's recall campaign number is 13KWF. Peterbilt's recall campaign number is 0513-E.
Recall 13V-082: Seat Belts
Problem: PACCAR is recalling certain model year 2014 Kenworth T270 and T370 trucks, manufactured from January 31, 2013, through February 4, 2013. The left hand seat belt floor pan reinforcement bracket was not positioned correctly during assembly. This could result in the failure of the seat belt anchor mounting.
Risk: In the event of a crash, the failure in the seat belt anchor may increase the risk of injury.
Fix: PACCAR will notify owners, and dealers will remove, reposition, and reinstall the reinforcement bracket free of charge. The recall began on April 15, 2013. Owners may contact Kenworth at 1-425-828-5000.
2014 Kenworth T270 problems reported by owners
| Problem area | Reports | |
|---|---|---|
| Tires | 1 |
Problems that are not covered by a recall are paid repairs; labor rates follow local mechanic pay — see what auto mechanics earn in each state.
Other Kenworth T270 years
Frequently asked questions
Does the 2014 Kenworth T270 have any recalls?
Yes — NHTSA lists 6 recalls for the 2014 Kenworth T270: 20V-199 (service brakes, air, electronic stability control (esc)), 15V-271 (visibility), 14V-013 (seat belts), 13V-612 (exterior lighting), 13V-222 (electrical system) and more. Not every vehicle is affected, so check your VIN at nhtsa.gov/recalls.
What is the most common problem with the 2014 Kenworth T270?
Owners report tires problems most often (1 reports).
Are Kenworth recall repairs free?
Yes. Safety recall repairs are free at authorized Kenworth dealers, whether you are the first owner or bought the car used.