2010 Dodge RAM 2500 recalls and problems

The 2010 Dodge RAM 2500 has 4 safety recalls and 236 owner complaints filed with NHTSA. Recall repairs are free at any Dodge dealer.

Recalls

Complaints

236

Crashes / fires

5 / 4

Injuries / deaths

6 / 0

Recalls may cover only some 2010 Dodge RAM 2500 vehicles. Check your VIN at NHTSA ↗ to see open recalls for your exact car.

2010 Dodge RAM 2500 recalls

Recall 17V-821: Power Train

Reported Dec 20, 2017 · 1,482,874 vehicles affected · Chrysler (FCA US LLC)

Problem: Chrysler (FCA US LLC) is recalling certain 2016-2017 Ram 3500 Cab Chassis with a Gross Vehicle Weight Rating (GVWR) of less than 10,000 lbs, 2011-2017 Ram 3500, 4500 and 5500 Cab Chassis vehicles, 2009-2017 Ram 1500 and 2010-2017 Ram 2500 and 3500 pickup trucks, all equipped with a column shifter. Pushing the brake pedal for prolonged periods when the vehicle is running and in PARK may cause the Brake Transmission Shift Interlock (BTSI) pin to stick in the open position. With the pin in the open position, the transmission can be shifted out of PARK into any gear without pushing the brake pedal or having the key in the ignition.

Risk: Being able to shift the transmission without pushing the brake pedal and/or without a key in the ignition can increase the risk of an unintended vehicle rollaway that may result in personal injury or a crash.

Fix: Chrysler will notify owners, and dealers will update the vehicle software, inspect the BTSI, and, as necessary, replace it, free of charge. The recall began February 26, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T79.

Recall 14V-635: Fuel System, Diesel, Engine and Engine Cooling

Reported Oct 8, 2014 · 315,325 vehicles affected · Chrysler Group LLC

Problem: Chrysler Group LLC (Chrysler) is recalling certain model year 2010-2014 Ram 2500, 3500, 4500, and 5500 trucks manufactured March 27, 2009, to September 5, 2013. In the affected vehicles, the electrical connectors of the diesel fuel heater may overheat.

Risk: If the connectors overheat, the fuel heater may leak fuel, increasing the risk of a fire.

Fix: Chrysler will notify owners, and dealers will replace the harness side connector with a silver plated beryllium copper terminal service kit, and inspect the fuel heater for leaks, replacing it as necessary, free of charge. Chrysler issued interim notification to owners on December 8, 2014. The recall began on April 27, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is P65.

Recall 13V-529: Steering

Reported Nov 6, 2013 · 271,733 vehicles affected · Chrysler Group LLC

Problem: Chrysler Group LLC (Chrysler) is recalling certain model year 2008-2012 RAM 2500 4X4 and 3500 4X4 trucks, 2008-2012 Dodge RAM 3500 4x2 Cab Chassis, and model year 2008 Dodge RAM 1500 Mega Cab 4x4. The left tie rod assembly may break.

Risk: A failure of the tie rod assembly may result in a loss of steering control, increasing the risk of a crash.

Fix: Chrysler notified owners on January 16, 2014 that dealers would inspect vehicles and replace the steering linkage assembly, if necessary. On or about February 27, 2014, Chrysler ceased its recall remedy program due to parts quality concerns, and then re-initiated it on or about April 14, 2014. In July 2015, and under a consent order with NHTSA, the company agreed to offer owners three options for remedying their vehicles: perform the original remedy, offer to repurchase the vehicle at the fair market value plus 10%, or offer an additional incentive offer towards the purchase of a new Dodge, Jeep, Chrysler, or Fiat vehicle. Chrysler will notify owners of the new recall options in a letter expected to be mailed on August 31, 2015. Owners may contact Chrysler at 1-800-247-9753. Chrysler's recall campaign number is N49.

Recall 11V-350: Steering

Reported Jul 6, 2011 · 242,780 vehicles affected · CHRYSLER GROUP LLC

Problem: Chrysler is recalling certain model year 2008-2011 dodge ram 2500/3500 4x4, manufactured from february 14, 2008, through march 28, 2011; model year 2008-2011 dodge ram 3500 cab chassis 4x2, manufactured from february 14, 2008, through march 28, 2011; and model year 2008 dodge ram 1500 mega cab 4x4, manufactured from february 14, 2008, through august 15, 2008, because the left tie rod ball stud may fracture. This condition tends to occur during low speed parking lot type maneuvers when the customer is making a tight turn. Additionally, model year 2003-2008 dodge ram 2500/3500 vehicles may have received the affected tie rod assembly as a replacement part during normal service.

Risk: This condition could result in the potential loss of directional stability in the left hand front wheel, increasing the risk of a crash.

Fix: Dealers will inspect the tie rod ends for relative orientation and replace the left outer tie rod as required and perform a front end toe alignment as needed. This service will be performed free of charge. The safety recall began on october 3, 2011. Owners may contact chrysler at 1-800-853-1403.

2010 Dodge RAM 2500 problems reported by owners

Problem area	Reports
Steering	154
Suspension	32
Electrical System	22
Engine	20
Power Train	14
Unknown or Other	13
Wheels	9
Fuel/Propulsion System	8
Structure	7
Tires	7
Engine and Engine Cooling	6
Exterior Lighting	3

Most reported parts

Steering › Linkages › Tie Rod Assembly — 7
Structure › Body — 3
Suspension › Front — 2
Engine and Engine Cooling › Engine › Diesel — 2
Engine and Engine Cooling › Exhaust System › Emission Control — 2
Electrical System › Ignition — 2
Tires › Tread/Belt — 2
Exterior Lighting › Headlights — 1

Typical mileage at the time of the problem: 50,000 miles (median of owner reports).

Problems that are not covered by a recall are paid repairs; labor rates follow local mechanic pay — see what auto mechanics earn in each state.

Recent 2010 Dodge RAM 2500 complaints

Owner reports filed with NHTSA, as written (personal details removed). Complaints are not verified by NHTSA.

Structure · at 189,000 miles · reported Sep 22, 2025

The contact owns a 2010 Dodge Ram 2500. The contact stated that while performing routine maintenance on the vehicle, the contact observed that the passengerâs and driverâs side support rails on the sub frame had several sections that were severely rusted. The contact stated that there were gaps of approximately 2-feet on both rails where the metal was rusted through. The contact had not taken the vehicle to a local dealer or independent mechanic. The vehicle was not diagnosed or repaired. The contact researched online and became aware that the failure was a known issue. The manufacturer…

Steering · reported Dec 15, 2021

This is the 3rd time this happened to me. The first time I was driving around 55 and the truck started to shake so bad I could not actually hold onto the steering wheel, and I made it to the side of the road. I thought was a flat tire and I pulled over to find nothing wrong. The second was bad as it shook so violently, I was unable to make it to the side of the road, so I hit the brakes in the middle of traffic to stop. This 3rd time I happen to be traveling 65 mph on the interstate in PA and hit a small bump and all of the sudden the truck felt like it was bouncing off of the road. I hit the…

Engine and Engine Cooling · at 43,000 miles · reported May 10, 2021

The contact owns a 2010 ram 2500. The contact stated that the exhaust system regeneration required now warning light was illuminated. The vehicle was not taken to a local dealer. The vehicle was not repaired. The manufacturer was informed of the failure and informed the contact that the VIN was not under recall. The failure mileage was approximately 43,000.

Engine · at 144,074 miles · reported Apr 17, 2021

I received a ve5 late life emission performance degradation recall in january 2021. I had the recall performed on 1.27/2021 at razzari dodge, merced. They installed a new cat converter and exhaust manifold. When I got my truck back, I had an cel error code p2271 o2 sensor. I had to pay $707.74 and $978.98 to get the truck running. I had no previous cel. I think they broke the wiring harness or o2 sensors when they performed the recall. . I think the ve5 recall repair, should make the entire emissions system function, including the control electronics.

Unknown or Other · reported Feb 24, 2021

I took it to the dodge dealer for a recall notice I received, the recall was for the catalytic converter and the exhaust manifold to be replaced. The work was completed, I took the truck home and assumed things were fine. In january of this year I went under the truck to see about a oil leak I was having a problem with, I noticed the catalytic converter was dirty looking and had scratches on it. It had a brownish kind of light film on it. I did not look like a new one. I took it to another repair shop for their opinion. They couldn't be sure but they said it looks like an old one also, they…

Other Dodge RAM 2500 years

2012 201120102009 2008 2007 2006 2005 2004 2003 2002 2001 2000

Compare all Dodge RAM 2500 years · All Dodge models

Frequently asked questions

Does the 2010 Dodge RAM 2500 have any recalls?

Yes — NHTSA lists 4 recalls for the 2010 Dodge RAM 2500: 17V-821 (power train), 14V-635 (fuel system, diesel, engine and engine cooling), 13V-529 (steering), 11V-350 (steering). Not every vehicle is affected, so check your VIN at nhtsa.gov/recalls.

What is the most common problem with the 2010 Dodge RAM 2500?

Owners report steering problems most often (154 reports), followed by suspension (32). The typical mileage when problems were reported is about 50,000 miles.

Are Dodge recall repairs free?

Yes. Safety recall repairs are free at authorized Dodge dealers, whether you are the first owner or bought the car used.