2000 Peterbilt 320 recalls and problems
The 2000 Peterbilt 320 has 6 safety recalls. Recall repairs are free at any Peterbilt dealer.
Recalls may cover only some 2000 Peterbilt 320 vehicles. Check your VIN at NHTSA ↗ to see open recalls for your exact car.
2000 Peterbilt 320 recalls
Recall 19V-452: Exterior Lighting
Problem: PACCAR Incorporated (PACCAR) is recalling certain 1990-2020 Peterbilt 320 and 520 vehicles built with specific amber rear turn signals. The turn signals may also light up with the stop/tail lights when the brakes are applied. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."
Risk: Rear Turn signals that illuminate at the same time as the brake lights may create confusion and impair the effectiveness of the brake lights, increasing the risk of a crash.
Fix: PACCAR will notify owners, and for trucks with rear amber lights, dealers will add a jumper harness between the chassis electrical harness and amber tail lights, free of charge. The recall began August 1, 2019. Owners may contact PACCAR customer service at 1-940-591-4220. PACCAR's number for this recall is 19PBC.
Recall 02V-037: Steering
Problem: Heavy duty trucks equipped with trw tie rod ends on certain arvinmeritor and dana axles. Peterbilt will recall 1,434 vehicles equipped with arvinmeritor axles manufactured from december 11, 1999, to may 14, 2000, and from july 22 to september 30, 2000. Kenworth will recall 859 vehicles equipped with arvinmeritor vehicles manufactured from december 11, 1999, to may 23, 2000, and from july 27, 2000, to september 30, 2000 and kennworth will recall an additional 4,151 vehicles equipped with dana axles and manufactured from june 23 to december 6, 1999, and from may 23 to september 30, 2000. The tie rod and drag link ball stud ends contain bearings that are below the specified case depth and/or hardness.
Risk: This can lead to premature wear with possible separation of the ball stud from the socket, increasing the risk of loss of control of the vehicle.
Fix: Dealers will remove and replace all affected tie rods and drag links with different designed ends. Owner notification began july 15, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact peterbilt at 1-940-591-4201 or kenworth at 1-425-828-5440.
Recall 01V-140: Steering
Problem: Vehicle description: heavy duty trucks equipped with trw tie rod ends on certain meritor axles. The tie rod and drag link ball stud ends contain bearings that are below the specified case depth and/or hardness.
Risk: This can lead to premature wear with possible separation of the ball stud from the socket, increasing the risk of loss of control of the vehicle.
Fix: Dealers will remove and replace all affected tie rods and drag links with different designed ends. Owner notification began october 24, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact peterbilt at 1-940-591-4000 or kenworth at 1-425-828-5000.
Recall 01V-167: Suspension
Problem: Vehicle description: heavy duty trucks equipped with chalmers 1000 series and 800 series suspension kits. These suspension kits may have insufficient penetration of the weld attaching the torque rod eye to the torque rod tube.
Risk: Failure of the weld could result in separation of the eye and tube, causing a lock of axle retention, which could result in loss of vehicle control.
Fix: Dealers will replace all chalmers fixed torque rods on these vehicles. Owner notification began july 27, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact peterbilt at 1-940-591-4000 or kenworth at 1-425-828-5000.
Recall 01V-131: Electrical System
Problem: Vehicle description: heavy duty trucks. These vehicles are equipped with peterbilt's smartgage system containing a reduced function interface module (Rfim). This module receives data from various components/systems on the vehicle then sends the information to a microprocessor. A manufacturing defect in the rfim's can allow water to penetrate into the pressure block portion of the module, causing an electrical short in the pressure transducer connector.
Risk: This results in an erroneous air pressure reading on the gauge in the dash.
Fix: The rfim date code will be inspected and all rfim's built prior to september 9, 2000 will be replaced. Owner notification began june 13, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact peterbilt at 1-940-591-4000.
Recall 00V-027: Service Brakes, Air
Problem: Vehicle description: heavy duty trucks equipped with dual steering. Interference between the cab floor and the brake pedal can occur on the right hand side of the dual steer vehicle.
Risk: The brake pedal may not operate as intended and could result in loss of control of the vehicle.
Fix: Dealers will replace the brake pedal/pad assembly.
Other Peterbilt 320 years
Frequently asked questions
Does the 2000 Peterbilt 320 have any recalls?
Yes — NHTSA lists 6 recalls for the 2000 Peterbilt 320: 19V-452 (exterior lighting), 02V-037 (steering), 01V-140 (steering), 01V-167 (suspension), 01V-131 (electrical system) and more. Not every vehicle is affected, so check your VIN at nhtsa.gov/recalls.
Are Peterbilt recall repairs free?
Yes. Safety recall repairs are free at authorized Peterbilt dealers, whether you are the first owner or bought the car used.