2005 International 4200 recalls and problems

The 2005 International 4200 has 3 safety recalls and 1 owner complaint filed with NHTSA. Recall repairs are free at any International dealer.

Recalls
3
Complaints
1
Crashes / fires
0 / 0
Injuries / deaths
0 / 0

Recalls may cover only some 2005 International 4200 vehicles. Check your VIN at NHTSA ↗ to see open recalls for your exact car.

2005 International 4200 recalls

Recall 10V-267: Vehicle Speed Control

Reported Jun 15, 2010 · 2,085 vehicles affected · NAVISTAR, INC

Problem: Navistar is recalling certain model year 2003 through 2010 international trucks and ic commercial buses manufactured from december 4, 2001 through december 14, 2009 equipped with international vt365 engines having engine calibration pan2pvr0, pan2pvr1, or pan2pwr. The engine normally responds to a failed open accelerator position sensor circuit fault by returning the engine to low idle speed of 800 RPM and disabling the driver's ability to increase the engine speed. However if the open circuit corrects itself within 30 seconds of initiation, engine speed could suddenly increase to a high idle speed of 1200 RPM.

Risk: This increase to high idle speed may occur without warning causing a sudden and unexpected shift in vehicle position possibly resulting in property damage, personal injury, or death.

Fix: Navistar will notify owners and dealers will repair the vehicles free of charge. The safety recall began on july 1, 2010. Owners may contact navistar at 1-800-448-7825.

Recall 05V-368: Parking Brake

Reported Aug 26, 2005 · 13,654 vehicles affected · INTERNATIONAL TRUCK & ENGINE CORPORATION

Problem: Certain my 2005 through 2006 international heavy trucks and ic corp ce school buses manufactured between june 4, 2004, and march 31, 2005. The anchor bolt that is the pivot point for the driveline parking brake shoes may fatigue and break as a result of an incorrect surface treatment.

Risk: If the bolt breaks, the park brake may not engage. This could cause the vehicle to roll away without warning and could result in a vehicle crash, possibly resulting in property damage, personal injury, or death.

Fix: International recall no. 00518. International will notify owner and replace the affected anchor bolts free of charge. The recall began on october 14, 2005. Customers may contact international at 1-800-448-7825.

Recall 04V-508: Suspension

Reported Oct 27, 2004 · 703 vehicles affected · INTERNATIONAL TRUCK & ENGINE CORPORATION

Problem: On certain trucks built with iros rear air suspension systems, four rear suspension fasteners may not be tightened sufficiently. This hardware connects the main support members of the rear suspension to the hanger brackets.

Risk: This connection could fail if the nuts worked their way loose or off, or the bolts broke from fatigue. A failure of these fasteners could result in separation of the main support from the hanger bracket possibly resulting in a sudden loss of control of the vehicle, which could result in a crash.

Fix: Dealers will replace all four bolts and tighten the bolts properly. The recall began on november 5, 2004. Owners should contact international at 1-800-448-7825.

2005 International 4200 problems reported by owners

Problem areaReports
Service Brakes, Hydraulic1

Most reported parts

  • Service Brakes, Hydraulic › Foundation Components › Disc › Caliper — 1

Typical mileage at the time of the problem: 36,000 miles (median of owner reports).

Problems that are not covered by a recall are paid repairs; labor rates follow local mechanic pay — see what auto mechanics earn in each state.

Recent 2005 International 4200 complaints

Owner reports filed with NHTSA, as written (personal details removed). Complaints are not verified by NHTSA.

Service Brakes, Hydraulic · at 36,000 miles · reported Jun 20, 2007
Premature and excessive brake wear on rotors and pads on a 2005 4200 international truck. It had critical inner brake pad and rotor wear on the front and rear. Front left rotor and pad wear was due to failure of caliper, causing the truck to snap into oncoming traffic when under braking. Right front wear to both rotor and pad due to slide pins on caliper not returning pads to normal position. Truck had complete rear rotors and pad destroyed due to none sliding slide pins. Passenger rear rotor inner braking surface was ground down to 1/8 inch while the outer surface appeared to be within normal…

Other International 4200 years

Compare all International 4200 years · All International models

Frequently asked questions

Does the 2005 International 4200 have any recalls?

Yes — NHTSA lists 3 recalls for the 2005 International 4200: 10V-267 (vehicle speed control), 05V-368 (parking brake), 04V-508 (suspension). Not every vehicle is affected, so check your VIN at nhtsa.gov/recalls.

What is the most common problem with the 2005 International 4200?

Owners report service brakes, hydraulic problems most often (1 reports). The typical mileage when problems were reported is about 36,000 miles.

Are International recall repairs free?

Yes. Safety recall repairs are free at authorized International dealers, whether you are the first owner or bought the car used.