2008 Ford Crown Victoria recalls and problems

The 2008 Ford Crown Victoria has 3 safety recalls and 50 owner complaints filed with NHTSA. Recall repairs are free at any Ford dealer.

Recalls
3
Complaints
50
Crashes / fires
11 / 3
Injuries / deaths
6 / 1

Recalls may cover only some 2008 Ford Crown Victoria vehicles. Check your VIN at NHTSA ↗ to see open recalls for your exact car.

2008 Ford Crown Victoria recalls

Recall 14V-704: Steering

Reported Nov 5, 2014 · 36,888 vehicles affected · Ford Motor Company

Problem: Ford Motor Company (Ford) is recalling certain model year 2005-2011 Ford Crown Victoria, 2005-2011 Mercury Grand Marquis vehicles manufactured March 23, 2004, to August 30, 2011, and 2005-2011 Lincoln Town Car vehicles manufactured March 8, 2004, to August 30, 2011, and on which the upper intermediate shaft was serviced during the course of safety recall 13V-385. The prior repairs may not have been correctly performed.

Risk: Improper servicing of the upper intermediate shaft could cause the shaft to separate, which can then result in a loss of steering control, and increasing the risk of a crash.

Fix: Ford will notify the owners of vehicles whose repair records reflect that the upper intermediate steering shaft was repaired during the course of the prior recall 13V-385. Dealers will inspect and replace the upper immediate shaft if necessary free of charge. The recall began November 17, 2014. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 14S25.

Recall 13V-385: Steering

Reported Aug 29, 2013 · 355,000 vehicles affected · Ford Motor Company

Problem: Ford is recalling certain model year 2005-2011 Ford Crown Victoria (including Crown Victoria Police Interceptors), Mercury Grand Marquis, and Lincoln Town Car vehicles. The affected vehicles are currently registered or were originally sold in Connecticut, Delaware, the District of Columbia, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, and Wisconsin. Severe corrosion can seize the lower intermediate shaft which may cause the upper intermediate shaft to collapse and the steering column lower bearing to separate.

Risk: If the lower bearing separates, the vehicle may experience a loss of steering, increasing the risk of a crash.

Fix: Ford will notify owners and dealers will replace the lower intermediate shaft, free of charge. The upper intermediate shaft and steering column lower bearing will be inspected to identify any damage that may have occurred as a result of lower intermediate shaft corrosion, and repaired or replaced as necessary. If the steering column lower bearing has separated, a retainer clip will be installed. The recall began on October 23, 2013. Owners may contact Ford at 1-866-436-7332. Ford's recall number is 13S08.

Recall 07V-270: Suspension

Reported Jun 26, 2007 · 8,800 vehicles affected · FORD MOTOR COMPANY

Problem: On certain passenger vehicles, a front wheel bearing and hub assembly may fracture due to improper heat treatment.

Risk: If a hub fractures, it may potentially detach from the wheel knuckle, resulting in the wheel being retained only by the brake caliper assembly. As a result, the wheel may separate from the vehicle potentially resulting in a crash.

Fix: Dealers will inspect both front wheel bearing and hub assemblies and replace them free of charge. The recall began on june 22, 2007. Owners may contact ford at 1-800-392-3673.

2008 Ford Crown Victoria problems reported by owners

Problem areaReports
Steering25
Vehicle Speed Control11
Suspension6
Electrical System5
Power Train3
Structure2
Service Brakes2
Unknown or Other2
Seat Belts1
Service Brakes, Hydraulic1
Engine and Engine Cooling1
Air Bags1

Most reported parts

  • Seat Belts › Front › Buckle Assembly — 1
  • Engine and Engine Cooling › Engine — 1
  • Electrical System › Wiring — 1
  • Suspension › Front › Wheel Bearing — 1
  • Vehicle Speed Control › Accelerator Pedal — 1
  • Structure › Body — 1
  • Fuel System, Gasoline › Storage › Auxillary Tank — 1
  • Steering › Linkages › Knuckle › Spindle › Arm — 1

Typical mileage at the time of the problem: 100,500 miles (median of owner reports).

Problems that are not covered by a recall are paid repairs; labor rates follow local mechanic pay — see what auto mechanics earn in each state.

Recent 2008 Ford Crown Victoria complaints

Owner reports filed with NHTSA, as written (personal details removed). Complaints are not verified by NHTSA.

Electrical System · reported Aug 4, 2023
Complete instrument cluster failure, no lights illuminate except turn signals. Speed, rpm’s, fuel level, temperature, are completely off instrument cluster is completely dark when driving at night, told that the solders on the cluster are bad. (Defective?)
Power Train · at 115,000 miles · reported May 17, 2023
The contact owns 2008 Ford Crown Victoria. The contact stated that the vehicle failed to reverse while the transmission was shifted into reverse(R). The vehicle was towed to an independent mechanic, who replaced the linkage. The manufacturer was not made aware of the failure. The failure mileage was approximately 115,000.
Exterior Lighting · at 121,924 miles · reported Oct 5, 2022
The contact owns a 2008 Ford Crown Victoria. The contact stated while driving 55 MPH in a dark area with the high beam headlights activated, the headlights became inoperable. There was no warning light illuminated. The contact stated that the low beam headlights were activated to continue driving. The vehicle was not taken to the dealer. The contact stated she replaced the headlights and the fuse but the failure continued. The manufacturer was not contacted. The failure mileage was 121,924.
Steering · at 141,000 miles · reported Aug 24, 2022
The contact owns a 2008 Ford Crown Victoria. The contact stated that while driving at an undisclosed speed, the vehicle experienced a loss of power steering assist. The contact inspected the steering column underneath the hood and noticed that the steering shaft was corroded. The vehicle was not diagnosed nor repaired by an independent mechanic or dealer. The manufacturer was not made aware of the failure. The contact related the failure to NHTSA Campaign Number: 13V385000 (Steering) however, the VIN was not included in the recall. The failure mileage was approximately 141,000.
Steering · reported Jul 29, 2022
The right front wheel hub broke at the weld when turning in a parking lot. The part is available for inspection. Had this happened at freeway speed, the right front wheel would have departed the vehicle. The safety hazards are obvious. I attempted to contact customer service and they did not reply.There was no warning sign and the part has not been inspected. I am not a welder. It appears this part had a bad weld from the start. I suspect it was welded by a machine and there may be more just like it from the same production run.

Other Ford Crown Victoria years

Compare all Ford Crown Victoria years · All Ford models

Frequently asked questions

Does the 2008 Ford Crown Victoria have any recalls?

Yes — NHTSA lists 3 recalls for the 2008 Ford Crown Victoria: 14V-704 (steering), 13V-385 (steering), 07V-270 (suspension). Not every vehicle is affected, so check your VIN at nhtsa.gov/recalls.

What is the most common problem with the 2008 Ford Crown Victoria?

Owners report steering problems most often (25 reports), followed by vehicle speed control (11). The typical mileage when problems were reported is about 100,500 miles.

Are Ford recall repairs free?

Yes. Safety recall repairs are free at authorized Ford dealers, whether you are the first owner or bought the car used.