Recall 10V-049: 2009 Collins Bantam, 2009 Collins Grand Bantam and 1 more
COLLINS BUS CORPORATION recall for exterior lighting, reported to NHTSA on Feb 18, 2010, covering about 112 vehicles.
The problem
Collins is recalling certain model year 2009 bantam, super bantam, and grand bantam school buses manufactured between april 1 and october 1, 2009, built on ford cutaway chassis. The brake-turn separator module which is used to control the brake lights and turn signals lights in the rear may not always distinguish correctly between a brake signal input and a turn signal input from the ford chassis OEM wiring. For typical brake and turn signal operation, the stop/tail/turn lights at the rear of the bus will function properly. However, if the brakes are pumped/applied in a frequency matching that of the blinking turn signal while the turn indicator is on, there is the potential that the brake signal through the module may cancel out the turn signal temporarily or cause it to flash intermittently.
The risk
This can cause confusion to vehicles behind the bus as to whether the bus is turning or stopping increasing the risk of a crash.
The fix
Collins will notify owners and dealers will replace the brake-turn signal separator module, if the bus is equipped with one, free of charge. The safety recall began on march 2, 2010. Owners may contact collins toll-free at 1-800-533-1850 ext. 424.
Notes
Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (Tty 1-800-424-9153), or go to <a href=http://www.safercar.gov>http://www.safercar.gov</a> .
Recall details
| Manufacturer | COLLINS BUS CORPORATION |
|---|---|
| Component | Exterior Lighting › Turn Signal Exterior Lighting › Brake Lights |
| Recall started by | the manufacturer |
| NHTSA campaign number | 10V049000 |
Vehicles in this recall
| Vehicle | Model years | |
|---|---|---|
| Collins Bantam | 2009 | All years |
| Collins Grand Bantam | 2009 | All years |
| Collins Super Bantam | 2009 | All years |
Not every vehicle of these model years is included. Enter your VIN at nhtsa.gov/recalls ↗ or ask a dealer.
Frequently asked questions
What is recall 10V-049?
Collins is recalling certain model year 2009 bantam, super bantam, and grand bantam school buses manufactured between april 1 and october 1, 2009, built on ford cutaway chassis. The brake-turn separator module which is used to control the brake lights and turn signals lights in the rear may not always distinguish correctly between a brake signal input and a turn signal input from the ford chassis OEM wiring. For typical brake and turn signal operation, the stop/tail/turn lights at the rear of the bus will function properly. However, if the brakes are pumped/applied in a frequency matching that of the blinking turn signal while the turn indicator is on, there is the potential that the brake signal through the module may cancel out the turn signal temporarily or cause it to flash intermittently.
How is recall 10V-049 fixed?
Collins will notify owners and dealers will replace the brake-turn signal separator module, if the bus is equipped with one, free of charge. The safety recall began on march 2, 2010. Owners may contact collins toll-free at 1-800-533-1850 ext. 424.
Is the recall repair free?
Yes. Safety recall repairs are free at authorized dealers. Check whether your vehicle is included with its VIN at nhtsa.gov/recalls.