Recall 10V-018: 2009–2010 Pontiac Vibe
GENERAL MOTORS CORP. recall for vehicle speed control, reported to NHTSA on Jan 21, 2010, covering about 70,806 vehicles.
The problem
General motors is recalling certain model year 2009 and 2010 pontiac vibe vehicles. Due to the manner in which the friction lever interacts with the sliding surface of the accelerator pedal inside the pedal sensor assembly, the sliding surface of the lever may become smooth during vehicle operation. In this condition, if condensation occurs on the surface, as may occur from heater operation (Without A/C) when the pedal assembly is cold, the friction when the accelerator pedal is operated may increase, which may result in the accelerator pedal becoming harder to depress, slower to return, or, in the worst case, mechanically stuck in a partially depressed position.
The risk
The accelerator pedal may become hard to depress, slow to return to idle, or, in the worst case, mechanically stuck in a partially depressed position, increasing the risk of a crash.
The fix
Dealers will install a reinforcement bar in the accelerator pedal which will allow the pedal to operate smoothly. This service will be performed free of charge. The safety recall is expected to begin early february and be completed in late april 2010. Owners may contact pontiac at 1-800-620-7668 or at the owner center at www.gmownercenter.com.
Notes
Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (Tty 1-800-424-9153), or go to <a href=http://www.safercar.gov>http://www.safercar.gov</a> .
Recall details
| Manufacturer | GENERAL MOTORS CORP. |
|---|---|
| Component | Vehicle Speed Control › Accelerator Pedal |
| Recall started by | the manufacturer |
| NHTSA campaign number | 10V018000 |
Vehicles in this recall
Not every vehicle of these model years is included. Enter your VIN at nhtsa.gov/recalls ↗ or ask a dealer.
Frequently asked questions
What is recall 10V-018?
General motors is recalling certain model year 2009 and 2010 pontiac vibe vehicles. Due to the manner in which the friction lever interacts with the sliding surface of the accelerator pedal inside the pedal sensor assembly, the sliding surface of the lever may become smooth during vehicle operation. In this condition, if condensation occurs on the surface, as may occur from heater operation (Without A/C) when the pedal assembly is cold, the friction when the accelerator pedal is operated may increase, which may result in the accelerator pedal becoming harder to depress, slower to return, or, in the worst case, mechanically stuck in a partially depressed position.
How is recall 10V-018 fixed?
Dealers will install a reinforcement bar in the accelerator pedal which will allow the pedal to operate smoothly. This service will be performed free of charge. The safety recall is expected to begin early february and be completed in late april 2010. Owners may contact pontiac at 1-800-620-7668 or at the owner center at www.gmownercenter.com.
Is the recall repair free?
Yes. Safety recall repairs are free at authorized dealers. Check whether your vehicle is included with its VIN at nhtsa.gov/recalls.